PROMASEAL® Conduit Collar

PROMASEAL® Conduit Collaris designed for retrofitting around small (<32mm) plastic conduit pipes that pass through fire floor or wall slabs. It comes in one size (32mm) and can be used on smaller diameter conduits without modification. The collar is fixed to the floors/walls with two brackets.

PROMASTOP® UniCollar®

PROMASTOP® UniCollar® is an intumescent device designed to maintain the integrity of the fire resistant elements through which various plastic pipes pass. It is suitable for installation in various floors and walls similar to that in which it has been tested. In the event of a fire, the intumescent material in the PROMASTOP® UniCollar® rapidly expands, closing off the plastic pipe or combustible insulation and forming an insulating barrier. 

PROMASEAL® Retrofit Collar (circular base)

PROMASEAL® Retrofit Collar (circular base)is designed to be fitted around installed pipes that pass through floor slabs and have been tested with uPVC, HDPE and ABS pipes up to 150mm diameter. The larger opening within the collars will accommodate pipes (and uPVC pipe fittings) that have differing outside diameters.

PROMASEAL® Retrofit Collar (square base)

PROMASEAL® Retrofit Collar (square base)is multi purpose collar designed for use with concrete slabs, masonry and lightweight walls and lined ceilings.

PROMASEAL® Retrofit Floor Waste Collar

PROMASEAL® Retrofit Floor Waste Collaris designed to provide fire resistance where floor wastes penetrate wet areas.

PromaSnap® Floor Waste System

Floor wastes in wet areas are notoriously difficult to seal in the event of a fire. The lack of a pipe stack above the floor level means that the floor grate offers little protection from fire and smoke once the pipe work has burnt through. The PromaSnap® Floor Waste System is designed to provide an effective but simple solution for water proofing and the leveling of the screed for tiling and water flow from the floor.

PROMASEAL® Green Cast-in Collar

PROMASEAL® Green Cast-in Collaris designed to be fixed to formwork prior to the pouring of concrete floor slabs. The collar accommodates the uPVC pipe fitting within the thickness of the slab enabling space saving.

PROMASEAL® Wall Collars

PROMASEAL® Wall Collarsis designed for insertion into wall elements made of matrix engineered mineral, PromaX® mineral, calcium silicate, fibre silicate, plasterboard, concrete or masonry, and has been tested on uPVC and HDPE pipes.

PROMASEAL® Hi-Blu Collar

PROMASEAL® Hi-Blu Collaris designed to be fixed to formwork prior to the pouring of concrete floor slabs. It has been tested with various uPVC and HDPE pipes.

PROMASEAL® Fire Resistant Services Seal Collar

PROMASEAL® Fire Resistant Services Seal Collaris designed to be fixed to the formwork prior to pouring concrete floor slabs and to provide openings in floor slabs for various combustible service penetrations.

Promat MultiSeal® Cast-in Collar

Promat MultiSeal® Cast-in Collaris designed to be fixed to the formwork prior to pouring concrete floor slabs to provide openings in floor slabs for multiple service penetrations.

Promat PipeSeal® Cast-in Collar

Promat PipeSeal® Cast-in Collaris designed to be fixed to the formwork prior to pouring concrete floor slabs to provide openings in floor slabs for non fire resistant plastic pipe penetrations.

PROMASEAL®-A

PROMASEAL®-A is a water based acrylic sealant. The advantage of this environmentally friendly water based sealant is in making post installation and site clean up easier.

PROMASEAL® Bulkhead Sealer System

PROMASEAL® Bulkhead System is made using high density mineral wool that is coated with PROMASEAL® Bulkhead Sealer. The coated mineral wool remains in-situ during a fire situation and forms a barrier against the passage of flame, smoke and toxic gases.

PROMASTOP® Cement